| Subjects |
| 1. Permanent insulating shuttering system |
| 2. Internal insulating floor finishing system |
| 3. Construction products made of animal fibres for acoustic and thermal insulation |
| 4. Construction products made of vegetable fibres for acoustic and thermal insulation |
|
|
- Amendment regrouping previous versions
|
- cluster 1 for Factory made products made of vegetable and/or animal fibres
|
- cluster 1 Rev1 for Factory made products made of vegetable and/or animal fibres; Rev 1
|
- cluster 2 for in-situ formed loose fill products of vegetable or animal fibress
|
- Thermal insulation material and/or acoustic insulation material made of hemp fibres to be used under floating floors.
|
|
| 5. Kit for traffic noise reducing devices (using hollow blocks of cement bonded wood chips as permanent shuttering system) |
| 6. Prefabricated compressed mineral wool boards with two layers of acrylic paints (on the external side of the product) |
| 7. Lightweight sound absorbent baffle made of wood fibres (laminated particle board, for interior walls) |
| 8. Sound absorbing elements for internal use, made of melamine resin foam with variable surface structure, used with or without coating |
| 9. Vibration and impact noise isolation with floating floor systems. Surface mats and discrete (pads) resilient isolators as element of floating floor systems. |
| 10. Bitumen on coated polystyrene granules as a dry mix for impact sound insulation, |
| 11. Large-sized fibre gypsum panels used for walls of prefabricated houses. |
| 12. Channel bars (cast-in steel channel bars) |
| 13. Vibration and noise isolation with elastically fixed wall panels (elastomeric or composite-elastomeric materials placed between supported wall element and the structural element of the building) |
| 14. Chemical anchoring kit, consisting of a polymer resin and an activator contained separately within a single cartridge. Complete mixing when extruded |
| 15. Special anchors (bolt and eccentric sleeve of stainless steel) |
| 16. Wall plates made of stainless steel |
17. Kit consisting of a trap with partially mechanical closure, mounted in a non-trapped gully
17.1 Kit consisting of a trap with partially mechanical closure, mounted in a non-trapped gully – Rev 1 |
| 18. Rice husks in bulk |
19. Rubber-based expansion anchor
19.1 Rubber-based expansion anchor – Rev1 |
| 20. Cast-in anchor bolt |
| 21. Steel plate with cast-in anchor(s) |
| 22. Kit of epoxy concrete / glassfibre-reinforced polyester anchors / epoxy mortar |
| 23. Powder actuated fastener for the fixing of insulation material |
| 24. Connection and protection devices for load-bearing pre-cast concrete piles (two products: pile joint and rock shoe) |
| 25. Solid wood slab element (bridges) |
| 26. Punching preventer for concrete slabs |
| 27. Solid wood slab element (buildings) |
| 28. Roof insulation supporting waterproofing systems |
| 29. Cellulose-reinforced bitumen shingles |
| 30. Stud rails and double head studs for increasing the punching capacity of flat slabs on columns |
| 31. Homogenous building board for external cladding |
| 32. Composite structural floor system |
| 33. Internal covering system of gypsum fibre boards |
| 34. Homogenous building board for internal lining |
| 35. Gypsum bonded particleboard |
| 36. Cavity trays |
| 37. Couplings for standardised reinforcing bars |
| 38. Pressboard façade claddings |
| 39. Modular building panels |
| 40. Fastener of external wall claddings |
| 41. Microprismatic retro-reflective sheetings |
| 42. Building kit made of special components of wood-based materials |
| 43. Column shoes |
| 44. Connector for Sandwich elements of concrete |
| 45. Kit for manhole top consisting of Cover and additional rings made of plastic for different purposes |
| 46. Balcony glazing system without vertical frames |
| 47. Composite roof waterproofing kit |
| 48. Mechanical fastening system for fixation of thermal insulation in flat or pitched roofs made of steel |
| 49. Gas and watertight seals for pipes in the area of wall and floor penetrations |
| 50. Ceiling/flooring elements made of wooden boards or laths, glued on the flat side |
| 51. Sealing kits, profiles and strips usually made of foamed polyrethane, plastic impregnated bitumen, or butyl |
| 52. Joints sealing compounds and profiles |
| 53. Roof systems: large metal shells with or without thermal insulation |
| 54. Chemical waste drainage system |
| 55. 3D Construction Kit |
| 56. Steel truss for roofs |
| 57. Prefabricated roller shutter box |
| 58. Vibration and noise isolation with elastically suspended ceilings |
| 59. Anchor for External Thermal Insulation Composite Systems (ETICS) |
| 60. Tension Rod System |
| 61. Ventilation opening device with acoustic damping |
| 62. Wood shavings in bulk to be used for thermal insulation |
| 63. Kit for injection piles (composite steel/concrete piles) with a structural member of defined steel, dia 63,5 mm |
| 64. Elastomeric bearings for the building sector of type “b”: Profiled elastomeric bearing |
| 65. Sliding bearing |
| 66. Admixture for concrete recycling “Delvo Stop 10G” |
| 67. Admixture “Delvo stop 10 G” for washing water |
| 68. Rapid setting cement A, B and C |
| 69. Rapid setting cement |
| 70. Timber units for walls and roofs |
| 71. Single point supported vertical glazing |
| 72. Point fastener |
| 73. Surface water repellent product, hydrofobic agents based on organo-metallic substances |
| 74. Coating system eliminating electrostatic charges for facilities used for storage, filling and handling of water endangering liquids. |
| 75. Coating system to be used for facilities used for storage, filling and handling of water endangering liquids. |
| 76. Fire resistant glazed kits |
| 77. Wood fibre insulation as boards sprayed in situ |
78. Thermal insulating board made of mineral material
78.1 Thermal insulating board made of mineral material |
| 79. Kit for pipe system consisting of outer pipe made of concrete, unreinforced or reinforced and inliner made of unplasticized polyvinylchloride (PVC – U) which are fixed |
| 80. Light composite wood based beam |
| 81. Lightweight framing elements for non-ventilated sheet metal façades |
| 82. External thermal insulation system based on cement-free adhesive mortar And base coat |
| 83. Fire screen (A barrier to prevent the spread of fire, smoke and sparks in ventilation ducts) |
| 84. Fabric connecting joints |
| 85. Level-crossing systems (types A1, A2 and B) |
| 86. Plastic piping kits for the transport system of cold and hot water intended for human consumption, made of PE-RT with ot without barrier layer |
| 87. Double-wall cylindrical flat-bottom tank made of GRP |
| 88. Spherical, double-walled tank of polymer concrete faced with GRP |
| 89. Single-wall cylindrical flat-bottom tank of GRP |
| 90. Concrete screw for anchorage in normal-weight concrete |
| 91. Cartridge fired pin for connections for thin gauge steel members and sheeting |
| 92. Steelwork connector |
| 93. Buried glass reinforced filament wound(GRE)piping systems for the transport under pressure of water intended for human consumption |
| 94. Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water intended for human consumption in polluted soils |
| 95. Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water not intended for human consumption |
| 96. Buried glass reinforced filament wound (GRE) piping systems for drainage and sewerage with or without pressure |
| 97. Plastic piping kits for heating systems, made of PE-RT with an oxygen barrier layer |
| 98. Piping made from thermoplastic materials, for the transport of chilled water |
| 99. Factory made loose fill cellulose glass |
| 100. Pile Pipes made of ductile iron |
| 101. Thermal insulation kit for roofs intended to be assembled in situ |
| 101.1(rev 1) Thermal insulation kit for roofs intended to be assembled in situ |
| 102. Vibration isolation of buildings with elastomeric bearing |
| 103. Roofing Underlay |
| 104. Binder in Concrete and mortar |
| 105. Door Treshold with build-in draining system for draining off of water |
| 106. Hydraulic Binder (slag and additives) |
| 107. Specialised glued laminated wood beam |
| 108. Annular ringed shank nails and connector screws |
109. Fly ash for concrete
109.1 Fly Ash for Concrete Rev 1 |
| 110. Panels for acoustic and thermal insulation |
| 111. Pipe penetration seal using an intumescent mat |
| 112. Damper for damping vibrations, mainly in buildings |
| 113. Glass concrete composite system (gccs) |
| 114. Structural Sealant Glazing System |
| 115. Variable Geometry Moving Axix Unsprung Concealed Hinge Assembly |
| 116. Emergency Escape Bolt operated by a pull handle & frangible component |
| 117. Polyurethane-bound mats made of mineral material to be used for impact sound insulation |
| 118. Cement-bonded board |
| 119. Metal Anchor for use in autoclaved aerated concrete |
| 120. Levelling fastener system for roofs, walls and interior applications with sub-constructions made out of concrete |
| 121. Levelling fastener system for roofs, walls and interior applications with wooden sub-constructions |
| 122. Pre-fabricated elements made of concrete and reinforced concrete used in facilities to deal with liquid chemicals (substances hazardous to water) |
| 123. Sealing system made of asphalt to seal areas, suitable as installation for discharging water-contaminating liquids over sloping to use in construction works to deal with water-contaminating substances. |
| 124. Restoration system for sett paving areas |
| 125. Joint sealing system glued on concrete |
| 126. Surfacing material for a layer impervious to water contaminating substances |
| 127. Kit of waterproofing polymeric membrane and other components for creating a waterproofing system against action of water on walls and floors of buildings under indoor and outdoor conditions |
| 128. Kit of a Elastomer/Bitumen composite sheet and other components for creating a roof and construction waterproofing system |
| 129. Kit of liquid applied polymer modified mineral sealing mass and other components in contact with tile coverings for creating a waterproofing system against action of water on different parts of constructions under indoor and outdoor conditions |
| 130. Polypropylene foam insulating boards |
| 131. Intumescent, flexible fire stopping fire sealing product based on graphite (reactive material) |
| 132. Adhesive tape for structural glazing application |
| 133. Natural calcined pozzolana as type II addition |
| 134. Kit for pre-insulated aluminium ducts |
| 135. Ceramic coating for thermal insulation |
| 136. Translucent external wall insulation made of prefabricated façade panels |
| 137. Kit for soil nails |
| 138. Kit for rock and soil anchors |
| 139. Spherical bearing with special sliding material |
| 140. Floor covering on the basis of polyurethane |
| 141. Thin reflective insulation product intended to be used as thermal insulation complement in the construction envelope |
| 142. Spray-applied mineral wool |
| 143. Dry Plate |
| 144. Pipe liner for renovation of underground non-pressure sewerage networks with nominal pipe diameters from 100 mm to 1200 mm to be incorporated with a special procedure |
| 145. Steel beams with special joining technology |
146. Eastomeric bearings for the building sector Specific title of the products applied for:
Type "a": Elastomeric bearing of higher hardness |
| 147. Road Marking products |
| 148. A kit consisting of a thermal insulation board, fabricated from expanded polystyrene (EPS) and a defined facing to be used for accessible flat roofs for pedestrian traffic applied in a roofing system |
| 149. Finishing board, kit with patented click mechanism |
| 150. Plastic sheets for sealing of collecting basins and collecting rooms for the storage of water-contaminating liquids (liquids hazardous to water). |
| 151. Fire seals, smoke seals and combined fire and smoke seals - for fire resisting and/or smoke control door assemblies |
| 152. Unplasticized poly (vinyl chloride) (PVC-U) piping system for domestic waste water discharge inside the building to a maximum discharge temperature of 75 °C. |
| 153. Sheets of factory-made machine-welded fabric for cracking control in concrete elements |
| 154. Soft foam insulation |
| 155. Flexible coupling for gravity and pressure (below 1.5 bars) sewerage and drainage pipe |
| 156. Quenched and tempered wire for prestressing, ribbed and plane |
| 157. Plastic steps for underground man entry chambers |
| 158. Double wall static tanks made from rotating moulded polyethylene for above ground storage of domestic heating oils and diesel fuels |
| 159. Precast concrete products – Beams made of prestressed steel fibre concrete |
| 160. HRC T-headed reinforcement steel bar |
| 161. Special cement CEM III/A with high sulfate resistance |
| 162. Glass-crystallic Cladding plates |
| 163. Self-Adhesive Glass mesh Tape |
| 164. Highly densified EPS as a load bearing and thermal insulating element |
| 165. Insulation product made of expanded perlite (EPB) |
| 166. Composite cement (clinker, blast furnace slag, natural puzzolana) class 32,5 N-LH with high sulfate resistance |
| 167. Wood & Metal composite lighting columns |
| 168. Sauna Stove fired by wood |
| 169. Polyestyer fibre thermal & Acoustic insulation |
| 170. Timber Frame Kit |
| 171. Kit Composed by sub frame and fixings for fastening cladding elements and also external wall elements, made of stone and ceramics |
| 172. A packaged small domestic waste water treatment plant for up to 50 PT, made of rotationally moulded PE for use underground and subjected to traffic loads |
| 173. Compostion toilet |
| 174. With bricks coated external insulation system |
| 175. Boards made of natural agglomerated cork for thermal and acoustic insulation |
| 176. Bitumen shingles with mineral or synthetic reinforcement |
| 177. Laminated bitumen shingles with mineral or synthetic reinforcement |
| 178. Fiberboard for wall and roof constructions, vapour open |
| 179. Floor panel with a polyurethane surface |
| 180. Profiled steel sheeting for floor systems in combination with a ribbed reinforced concrete slab |
| 181. Punched metal plate fasteners |
| 182. Welded gabion products |
| 183. Pool Safety Cover |
| 184. Prefabricated cable pits in reinforced concrete |
| 185. Prefabricated cable pits made of polystyrene (ps) recycled |
| 186. Calcium carbonate fines as additions for concrete with binding properties similar to additions type II. |
| 187. Masonry Spacer Mat |
| 188. Roof insulation supporting roofing tiles |
| 189. One component bitumen-polyurethane resin for flashing application applied directly to bitumen waterproofing membrane used in the horizontal part of the roof |
| 190. Remedial Damp-proof course |
| 191. Powered pedestrian door drives and systems |
| 192. Sandwich boards composed by three layers, respectively of agglomerated cork, coconut fibres and fibreboard MDF |
| 193. Agglomerated cork and grain recycled rubber with polyurethane binder |
| 194. Agglomerated cork with polyurethane binder |
| 195. Mortar with insulating components for floor-decks |
| 196. Cast-in anchor with internal threaded socket |
| 197. Fastening screw for metal sheet roof covering |
| 198. Fabricated fittings manufactured by heat moulding (thermo moulding) from an extruded unplasticized poly(vinyl chloride) (PVC-U) pipe with an intermediate layer of PVC-U foam, to be used with PVC-U pipes for non-pressure drainage and sewerage buried in the ground. |
| 199. Swivel joints manufactured by heat moulding (thermo moulding) from an extruded unplasticized poly(vinyl chloride) (PVC-U) pipe, with a free angle of deflection to a maximum of 30 º to increase the flexibility of fittings, such as brands, couplers and saddles, in buried non-pressure and sewage applications |
| 200. Copper plumbing tube with polyethylene covering for sanitary and heating applications |
| 201. Kit for closure system for conveyors systems |
| 202. Insulation material made of granulated polystyrene and compound |
| 202.1 (Rev1) Insulation material made of granulated polystyrene and compound |
| 204. Glazing guardrail kit |
| 205. PVC sheet for leak protecting linings |
| 206. Thermomechanically rolled long steel products made of weldable fine grain structural steel of special steel grades |
| 207. Structural sealant glazing on wood frame |
| 208. External Thermal Insulation Composite System faced with clinker brick |
| 209. Semi-flexible pavement/floor topping |
| 210. Ventilated façade system with self-supporting composite panels. |
| 211. Mechanical Anchorages for Reinforcing Bars |
| 212. Reinforcing Bars with Threaded Ribs |
| 213. Hot rolled products of structural steels |
| 214. Plastics piping kits for the transport system of hot and cold water, intended for human consumption, made of glass reinforced polypropylene |
| 215. Plastics piping kits for heating systems, made of glass-reinforced polypropylene |
| 216. Plastics piping kits to be used in fixed fire fighting systems, made of glass-reinforced polypropylene |
| 217. Light weight cementitious screed |
| 218. Modular tiles of natural stone including snap-on connection and polyurethane layer |
| 219. Factory-made boards and products formed by moulding of a silicate polystryrene composite for the thermal and/or acoustical insulation |
| 220. An anchor device designed to be fully bonded to a multi layered modified bitumen roof waterproofing system provided with a polyester reinforcement , to form a structural anchor without perforating the roof waterproofing system, intended to connect a personal fall protection system |
| 221. Bolted glazing kit |
| 222. Wood-concrete composite slab |
| 223. Light weight floor system |
| 224. Integrated facade kits with active and/or passive solar elements (IFK-SRE) |
| 225. Concrete Protection Linings of Collecting Basins/Rooms for Liquids Hazardous to Water |
| 226. Sealing Kit for Filling Areas of Petrol Stations |
| 227. Reinforcing Kit with Carbon Fibre Laminates for the Strengthening of Beams and Plates of reinforced and Prestressed Concrete |
| 228. Light composite wood-based beam |
| 229. Liquid applied roof waterproofing kits based on block co-polymer elastomeric, 100% synthetic rubber |
| 230. Kit for reinforced concrete members subject to compressive loading |
| 231. Sand Bentonite Polymer Gel(SBPG) for application as a sealing barrier or as a component of a sealing barrier system |
| 232. Sump pallets made of steel |
| 233. Connections for precast concrete columns and beams |
| 234. Connection Units for Concrete staircases and slabs |
| 235. Type I addition for concrete |
| 236. Type II addition for concrete |
| 237. Chimney kit with clay flue liner |
| 238. Prefabricated wall elements of bonded clay masonry unit |
| 239. Kit for bonding of clay masonry units on site |
| 240. Permanent shuttering for floors |
| 241. Floor insulation based on polystyrene light weight concrete |
| 242. Precast concrete products-Wall elements of steel fibre concrete |
| 243. Structural composite lumber products: Laminated Strand Lumber (LSL) and Parallel Strand Lumber (PSL) |
244. Road marking materials – retroreflective elements with refractive
index 1.9
Road marking materials – retroreflective elements with refractive
index 2.4 |
| 245. Structural Sealant Glazing Kit as infill element for façade contructions |
| 246. Suppression mode early suppression, fast response automatic sprinkler |
| 247. Insulated glass unit punctually anchored |
| 248. Glued laminated timber beam with 2 or more waney lamellas |
| 249. Modified Fly Ash for concrete |
| 250. Special drawn sheet glass |
| 251. Kit for non-loadbearing internal and external walls made of glass blocks |
| 252. Wooden shingles |
| 253. Parapet made of glass with failure protection |
| 254. In situ sprayed polyurethane foam for sealing joints, filling cavities and for fixing construction elements |
| 255. Mortars based on sulphur |
| 256. Sulphur concrete elements |
| 257. Fibres for concrete : metallic amorphous fibres |
| 258. Factory made masonry units of cement bonded wood chips |
| 259. Prefabricated timber framed load-bearing wall elements |
| 260. Box Beam with perforated, inclined webs |
| 261. Expanding structural bolting assemblies for blind fastening of steel components |
| 262. Steel mesh for retaining of unstable slopes by controlling and preventing rockfalls and loose debris flow along highways roads, and railways |
| 263. Cable Net Systems |
| 264. Wire Rope Loop System to Connect Precast Concrete Components |
| 265. Plastic Anchor for Use in Concrete |
| 266. Powder Actuated Fastener for Multiple Use in Concrete for Non-structural Applications |
| 267. Coating System for Inside Use of Tanks Made of Steel for the Storage of Liquids Hazardous to Water |
| 268. Light Weight Roof System |
| 269. EPI adhesives |
| 270. Calcined layer silicate based type II addition |
| 271. Sedimentation reducing concrete admixture |
| 272. Roof and wall systems with hidden fastenings |
| 273. Flat aluminium products made of aluminium alloy EN-AW-5059 |
| 274. Corrugated bitumen tiles |
| 275. Large span load-bearing sandwich panels for roofing |
| 276. Reinforced tape for assembled gypsum platerboards |
| 277. Prefabricated Small Wastewater Treatment Plants |
| 278. Insulation Product made of Wood Shavings, Inorganic Cementing Agent and water |
| 279. Thermal insulation board made of expanded polystyrene (EPS) and cement |
| 280. Expanded polystyrene (EPS) insulating blocks |
| 281. Polymeric concrete addition |
| 282. Load bearing thermal insulation elements which form a thermal break between balconies and internal floors |
| 283. Powder-coating system for structural steel components without previously galvanizing |
| 284. Solid wood slab element – element of dowel jointed timber boards to be used as a structural element in buildings |
| 285. Prefabricated wood slab element made of mechanically jointed square-sawn timber members to be used as a structural element in buildings |
| 286. Rubber fibre mat to be used for impact sound insulation |
| 287. Prefabricated steel and stainless steel wire ropes with end connector |
| 288. Self-tapping screws for use in timber construction |
| 289. Extended Coverage Control Mode Automatic Sprinkler |
| 290. Suspended ceiling kits for use in exterior applications |
| 291. Terrace decking kit |
| 292. Processed blend of main constituents according to EN 197-1, without clinker, as a type II addition for concrete |
| 293. Corrugated plastic ducts |
| 294. Welded gabion products |
| 295. Spacer system for site assembled double skin metal roof and wall cladding. |
| 296. Fastening Screws for Sandwich Panels |
| 297. Thermal insulation roof kit for metal or flexible roof coverings |
| 298. Roof slates |
| 299. Kit for prestressed flat slabs with steel fibre reinforced concrete |
| 300. Low shrinkage calcium sulphoaluminate cement |
| 301. Insulating Glass Units Production with Heat Mirror Film |
| 302. Mineral pre-coated ceiling panels |
| 303. Self-adhesive Anti-slip Covering for Floorings |
| 304. Liquid Applied Water Vapour Control Layers |
| 305. Factory made vacuum insulation panel (VIP) |
| 306. Granulated polystyrene for core thermal insulation of cavity walls (two-leaf masonry walls) |
| 307. Cement – bonded insulating board made of wood chips |
| 308. Heat Mirror |
| 309. Kits for green roofs |
| 310. Thin walled steel flat products predominantly for roofing and cladding with organic coil-coating system |
| 311. Steel corrugated culverts |
| 312. A Rubber/Bitumen Liquid Applied® Bridge Deck System |
| 313. Floor void former |
| 314. Surface maintenance treatment for highways |
| 315. Surface repair treatment for highways |
| 316. Rapid Hardening Calcium Sulphoaluminate based Cement |
| 317. Kit for prestressed flat slabs with steel fibre reinforced concrete |
| 318. Kit of concrete columns and prefabricated bracing light-weight concrete infill |
| 319. Plantable coverings made of welded steel grids for slope stabilisation systems |
| 320. Welded soil boxes |
| 321. Cast or spray applied hemp/lime kit for internal and external wall construction |
| 322. Kit consisting of chimney flue liner and ancillaries |
| 323. Composite boards made of agglomerated cork and grain recycled rubber for acoustic and thermal insulation |
| 324. Hydraulic filling material for large underground volumes |
| 325. Radon detector device |
| 326. Finger Jointed green wood for structural application |
| 327. Load Bearing timber framed wall panels |
| 328. Steel framed membrane building kit |
| 329. Reaction resin mortar for joints between concrete elements |
| 330. Roof covering kit using in-situ sprayed polyurethane foam |
| 331. Glued laminated timber with high-strength lamellas and special longitudinal joints |
| 332. Granulated polystyrene foam with binding agent as non-load bearing thermal insulation |
| 333. Plastics piping kits for heating systems, made of multilayer composite pipes and compression fittings |
| 334. Plastics piping kits for heating systems made of crosslinked medium density polyethylene (PE-MDX) |
| 335. Plastics piping kits for heating systems, consisting of pipes made of PB-R and mechanical and/or welded fittings |
| 336. Plastics piping kits for heating systems, consisting of pipes made of PB-H Type II and mechanical and/or welded fittings |
| 337. Light gauge secondary structures |
| 338. Metal Frame self-storage system |
| 339. Alkali resistant glass fibres containig zirconium dioxide for the use in concrete |
| 340. Spun columns with reinforcement areas of longitudinal reinforcement higher than 8% up to 16% of the area of the concrete section |
| 341. LAMI Glass fibre reinforced polyester doors (LAMI GTP doors) |
| 342. Hot rolled products and structural components made of steel grades Q325B, Q235D,Q345B and Q345D |
| 343. Glass-fibre reinforced plastic bar used as reinforcing bar of concrete |
| 344. Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances and ancillaries |
| 345. Strength graded finger jointed structural timber – solid, tension proof loaded, structural timber beams and, used as laminations, flatwise laminated beams with up to 4 laminations |
| 346. Flexible plug expansion joint for road bridges |
| 347. Mechanical splice for reinforcing steel bars |
| 348. Ventilation ducts made from insulation boards |
| 349. Kit for system stove-chimneys with clay/ceramic flue liner and integrated stove |
| 350. Structural glazing system mechanically supported with fix points |
| 351. Structural glazing system mechanically supported with holders |
| 352. Roof Hatches, Floor, Wall and Ceiling Doors providing access or for use as an emergency door / with or without fire resistance |
| 353. Blind rivets for metal members and sheeting |
| 354. Vacuum insulation panel (VIP) with factory apllied protection layers |
| 355. Lift control pot bearing |
| 356. Load bearing external wall kit |
| 357. Kit for load bearing masonry subject to seismic actions |
| 358. Internal wall-and floor- covering made of coconut shells |
| 359. Sealing device for waterproofing form tie holes, holes or cast-in pipes in concrete casting and masonry walls |
| 360. Liquid applied roof waterproofing kit based on a rubbersolution |
| 361. Early Suppression, Fast Response (ESFR), K240 to K360, Upright and Pendent Automatic Fire Sprinklers |
| 362. Polyester fibre mat with embedded silica aerogel |
| 363. Steel Lighting columns |
| 364. Strength graded structural timber - square edged logs with wane |
| 365. Monolithic or laminated beam and wall logs made of timber |
